Archival Journal Articles

(Graduated and current students and post-docs listed in capital letters)

-

 

-

S.S. VEMULA, M. Ji, L.M. Headings, K. GARGESH, S. Soghrati, and M.J. Dapino, “Analytical model for large deflection bending of helically stranded electrical wires,” International Journal of Mechanical Sciences. Manuscript #SUBMIT2IJMS 2019 2509 in review.

-

Z. Wu and M.J. Dapino, “Design and adaptive control of matrix transformer based indirect converter for large-capacity circuit breaker testing application,” IEEE Transactions on Industrial Electronics. Manuscript #19-TIE-1968 in review.

-

S.S. VEMULA, L.M. Headings, K. Gargesh, M.J. Dapino, E. Taghipour, S. Soghrati, “Finite element analysis of mechanical behavior of electrical wire harnesses: high fidelity and reduced order models,” International Journal of Mechanical Sciences. Manuscript #SUBMIT2IJMS 2019 1008 in review.

-

S. DONG and M.J. Dapino, “Effect of ductility on ultrasonic lubrication of materials under adhesive wear conditions.” Manuscript #WEA 2018 1500 in review.

-

R. Lowe, H. TARI, M.J. Dapino, and S. Bechtel, “A finite-strain magneto-electro-elastic framework for modeling soft multiferroic magnetoelectric materials,” Journal of the Mechanics and Physics of Solids. Manuscript #JMPS 2018 494 in review.

-

Z. DENG and M.J. Dapino, “Shunted magnetostrictive devices in vibration control,” IEEE/ASME Transactions on Mechatronics. Manuscript #TMECH-06-2018-7923 in review.

121.

Y. ZHOU, L.M. Headings, and M.J. Dapino, “Discrete layer jamming for variable stiffness co-robot arms,” ASME Journal of Mechanisms and Robotics. February 2020, Vol. 12 / 015001-1.  https://doi.org/10.1115/1.4044537

120.

L. SHU, J. Yang, B. Li, Z. DENG, and M.J. Dapino, "Impact force sensing with magnetostrictive Fe-Ga alloys," Mechanical Systems and Signal Processing. October 2019. https://doi.org/10.1016/j.ymssp.2019.106418
 

119.

A. RAMANATHAN, L.M. Headings, and M.J. Dapino, “Static strain measurement with piezoelectric films,” Sensors & Actuators: A. Physical. Manuscript #SNA 2019 788 accepted for publication.

118.

T. HAN, C.-H. Kuo, N. Sridharan, L.M. Headings, S.S. Babu, and M.J. Dapino, "Effect of preheat temperature and post-process treatment on the microstructure and mechanical properties of stainless steel 410 made via ultrasonic additive manufacturing,'' Materials Science and Engineering A, 769, 138457, 2020.

117.

L. SHU, S. Zhao, Z. Wu, W. Chen, and M.J. Dapino, “Optimal design and control of a new permanent magnet AC contactor with forced breaking mechanism,” IET Electric Power Applications. Manuscript #EPA-2019-0193  accepted for publication.

116. V.S.C. CHILLARA and M.J. Dapino, “Review of morphing laminated composites,” Applied Mechanics Reviews.  Jan 2020, 72(1): 010801. Online: October 2019. https://doi.org/10.1115/1.4044269

115.

S.K. CHILELLI, J.J. SCHOMER, and M.J. Dapino, “Detection of crack initiation and growth using fiber Bragg grating sensors embedded into metal structures through ultrasonic additive manufacturing,” Sensors 2019, 19(22), 4917. November 2019. https://doi.org/10.3390/s19224917

114.

V.S.C. CHILLARA and M.J. Dapino, “Bistable laminates with non-cylindrival curved shapes,” Composite Structures. 230 (2019) 111502. https://doi.org/10.1016/j.compstruct.2019.111502

113.

C.-H. Kuo, N. Sridharan, T. HAN, M.J. Dapino, S.S. Babu, “Ultrasonic additive manufacturing of 4130 steel using Ni interlayers,” Science and Technology of Welding and Joining, 24(5), 382390, 2019.

112.

Z. DENG, I. NAS, and M.J. Dapino, "Torque Analysis in Coaxial Magnetic Gears Considering Nonlinear Magnetic Properties and Spatial Harmonics," IEEE/ASME Transactions on Magnetics. January 2019. https://doi.org/10.1109/TMAG.2018.2885729

111.

S. Kumar, M. Kumar, S. SANTAPURI, M.J. Dapino, “Computationally efficient locally linearized constitutive model for magnetostrictive materials,” Journal of Applied Physics. 125, 215108 (2019). doi: 10.1063/1.5086953

110.

V.S.C. CHILLARA and M.J. Dapino, “Stress-biased laminated composites for smooth folds in origami structures,” Materials Research Express. 6, 025703, 2019.

109.

H. GUO, M.B. GINGERICH, L.M. Headings, R. Hahnlen, and M.J. Dapino, “Seamless joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM),” Composite Structures. Vol. 2018,180-188, 2019.

108.

V. S. C. CHILLARA, L.M. Headings, R. Tsuruta, E. Itakura, U. Gandhi, U. and M.J. Dapino, “Shape memory alloy-actuated prestressed composites with application to morphing automotive fender skirts,” Journal of Intelligent Material Systems and Structures, 30(3):479-494, 2018.

107.

Z. DENG and M.J. Dapino, “Review of magnetostrictive materials for structural vibration control,” Smart Materials and Structures. Vol. 25, 11301, 2018.

106.

Z. DENG, M.B. GINGERICH, T. HAN, and M.J. Dapino, “Yttria-Stabilized Zirconia-Aluminum matrix composites via ultrasonic additive manufacturing,” Composites Part B. Vol. 151, 215-221, 2018.

105.

Z. DENG, Q. ZHANG, and M.J. Dapino, “Dynamic model for magnetostrictive systems with applications to damper design,” IEEE/ASME Transactions on Mechatronics. Vol. 23, Issue 4, 1823-1831, 2018.

104.

E. Taghipour, S.S. VEMULA; Z. Wang, Y. ZHOU, H. Qarib, K. Gargesh, L.M. Headings, M.J. Dapino, S. Soghrati, “Characterization and computational modeling of electrical wires and wire bundles subject to bending loads,” International Journal of Solids and Structures. Vol. 140, 211-227, 2018.

103.

A. Levy, A. Miriyev, N. Sridharan, T. HAN, E. Tuval, S.S. Babu, M.J. Dapino, and N. Frage, “Ultrasonic additive manufacturing of steel: Method, post-processing treatments and properties,” Journal of Materials Processing Technology. 256, 183-189, 2018.

102.

V.S.C. CHILLARA and M.J. Dapino, “Stability considerations and actuation requirements in bistable laminated composites,” Composite Structures, 184, 1062-1070, 2018.

101.

R. Harne, Z. DENG, and M.J. Dapino, “Adaptive magnetoelastic metamaterials: a new class of magnetorheological elastomers,” Journal of Intelligent Material Systems and Structures, 1045389X17721037, 2017.

100.

Z. DENG, and M.J. Dapino, “Review of magnetostrictive vibration energy harvesters,” Smart Materials and Structures. Vol. 26, No. 10: 103001, September 2017.

99.

Z. DENG, and M.J. Dapino, “Magnetic flux biasing of magnetostrictive sensors,” Smart Materials and Structures, Vol. 26, No. 5, 055027, April 2017.

98.

H. TARI, S.S. SANTAPURI, and M.J. Dapino, “Efficient and robust nonlinear model for smart materials with application to composite magnetostrictive plates,” Smart Materials and Structures, Vol. 26 (4), 045010, 2017.

92.

N. Sridharan, P.J. WOLCOTT, M.J. Dapino, and S.S. Babu, “Microstructure and mechanical property characterization of aluminum-steel joints fabricated using ultrasonic additive manufacturing,” Science and Technology of Welding and Joining, 22(5), 373-380, 2017.

97.

H. TARI and M.J. Dapino, “Globally convergent nonlinear 3D inverse model for smart materials with hessian-based optimization,” Computer Methods in Applied Mechanics and Engineering, 318 (2017), 864-881, May 2017.

96.

S. DONG and M.J. Dapino, “Dynamic system model for ultrasonic lubrication in perpendicular configuration,” Ultrasonics, 75, 98-105, 2017.

95.

Z. DENG and M.J. Dapino, “Influence of electrical impedance and mechanical bistability on Galfenol-based unimorph harvesters,” Journal of Intelligent Material Systems and Structures, Vol. 28, 3: pp. 421-431, 2017.

94.

A. HEHR and M.J. Dapino. “Dynamics of ultrasonic additive manufacturing,” Ultrasonics, 73, 49-66, 2017.

93.

V.S.C. CHILLARA and M.J. Dapino, “Mechanically-prestressed bistable composite laminates with weakly coupled equilibrium shapes,” Composites Part B: Engineering, Vol. 111, pp. 251-260, February 2017.

91.

Z. DENG, J.J. SCHEIDLER, V. Asnani, and M.J. Dapino, “Quasi-static major and minor strain-stress loops in textured polycrystalline Fe81:6Ga18:4 Galfenol,” Journal of Applied Physics, 120, 243901, 2016.

90.

V.S.C. CHILLARA, L.H. Headings, and M.J. Dapino, “Multifunctional composites with intrinsic pressure actuation and prestress for morphing structures,” Composite Structures, Vol.  157, pp. 265-274, December 2016.

89.

J.J. SCHEIDLER, V.M. Asnani, and M.J. Dapino, “Dynamic characterization of Galfenol (Fe81.6Ga18:4),” NASA/TP-2015-218754, June 2016.

88.

P.J. WOLCOTT, C. PAWLOWSKI, L.M. Headings, and M.J. Dapino, “Seam welding of aluminum sheet using ultrasonic additive manufacturing system,” ASME Journal of Manufacturing Science and Engineering, 139(1), 011010, August 2016.

87.

J.J. SCHEIDLER, V.M. Asnani, and M.J. Dapino, “Frequency-dependent, dynamic sensing properties of polycrystalline Galfenol (Fe81.6Ga18.4),” Journal of Applied Physics, Vol. 119, 244902, 2016.

86.

L. SHU, M.J. Dapino, G. Wu, and D. Chen,  “Frequency dependent sliding mode control of Galfenol-driven unimorph actuator based on finite element model,” IEEE Transactions on Industrial Electronics, Vol. 63, Issue 2, February 2016.

85.

N. Sridharan, P. WOLCOTT, M.J. Dapino, and S.S. Babu, “Microstructure and texture evolution in Al-1100 and Cp-Ti dissimilar welds fabricated using ultrasonic additive manufacturing,” Scripta Materialia, Vol. 117, 1-5, 2016.

84.

A. HEHR, P.J. WOLCOTT, and M.J. Dapino, “Effect of weld power and build compliance on ultrasonic consolidation,” Rapid Prototyping Journal, 22 (2), 377-386, 2016.

83.

P.J. WOLCOTT, N. Sridharan, S.S. Babu, A. Miriyev, N. Frage, and M.J. Dapino, “Characterisation of Al-Ti dissimilar material joints fabricated using ultrasonic additive manufacturing,” Science and Technology of Welding and Joining, Vol. 21, Issue 2, 2016.

82.

J.J. SCHEIDLER, V.M. Asnani, and M.J. Dapino, “Dynamically-tuned magnetostrictive spring with electrically-controlled stiffness,” Smart Materials and Structures, Vol. 25, 035007, 2016.

81.

P.J. WOLCOTT, A. HEHR, C. PAWLOWSKI, and M.J. Dapino, “Process improvements and characterization of ultrasonic additive manufactured structures,” Journal of Materials Processing Technology, January 2016.

80.

L. SHU, G. Wu, D. Chen and M.J. Dapino, “Modeling of Galfenol bending actuator considering nonlinear hysteresis and dynamic real-time control strategy,” Smart Materials and Structures, Volume 25, Number 3, February 2016.

79.

J. SCHEIDLER and M.J. Dapino, “Mechanically-induced magnetic diffusion in cylindrical ferromagnets,” Journal of Magnetism and Magnetic Materials, Vol. 397, 233-239, 2016.

78.

Z. DENG and M.J. Dapino, “Modeling and design of Galfenol unimorph energy harvesters,” Smart Materials and Structures," Vol. 24, No. 12, 125019, 2015.

77.

S. DONG and M.J. Dapino, “Experiments on ultrasonic lubrication using a piezoelectricallyassisted tribometer and optical profilometer,” Journal of Visualized Experiments, Issue 103, September 2015.

76.

Z. Wu, G. Wu, M.J. Dapino, L. Pan, and K. Ni, “Model for variable-length electrical arc plasmas under AC conditions,” IEEE Transactions on Plasma Science, Vol. 43, No. 8, pp. 2730-2737, August 2015.

75.

X. CHEN, A. HEHR, and M.J. Dapino, and P. Anderson, “Deformation mechanisms in NiTi-Al composites fabricated by ultrasonic additive manufacturing,” Shape Memory and Superelasticity, Volume 1, Issue 3, pp 294-309, 2015.

74.

S. SANTAPURI, J. SCHEIDLER, and M.J. Dapino, “Two-dimensional dynamic model for composite laminates with embedded magnetostrictive materials,” Composite Structures, Volume 132, pp. 737745, 2015.

73.

A. HEHR and M.J. Dapino, “Interfacial shear strength estimates of NiTi - Al matrix composites fabricated via ultrasonic additive manufacturing,” Composites Part B: Engineering, Vol. 77, 199 - 208, 2015.

72.

H. TARI and M.J. Dapino, “Robust solution procedure for the discrete energy-averaged model on the calculation of the 3D hysteretic magnetization and magnetostriction of iron-gallium alloys,” Journal of Magnetism and Magnetic Materials, Vol. 117, 17, 6 April 2015.

71.

W. Huang, Z. DENG, M.J. Dapino, L. Weng, B. Wang, “Electromagnetic-mechanicalthermal fully coupled model for Terfenol-D devices,” Journal of Applied Physics, Vol. 117, 17, 6 April 2015.

70.

J. Park, L.M. Headings, M.J. Dapino, J.W. Baur, and G.P. Tandon, “Investigation of interfacial shear stresses, shape fixity, and actuation strain in composites incorporating shape memory poly- mers and shape memory alloys,” Frontiers in Materials - Smart Materials, doi: 10.3389/fmats.2015.00012, 2 March 2015.

69.

Z. DENG and M.J. Dapino, “Characterization and finite element modeling of Galfenol minor flux density loops,” Journal of Intelligent Material Systems and Structures, Vol. 26, pp. 47-55, January 2015.

68.

J. XU, L.M. Headings, and M.J. Dapino, “High sensitivity Polyvinylidene Fluoride (PVDF) microphone based on area ratio amplification and minimal capacitance,” IEEE Sensors Journal, Vol. 15 , N. 5, pp. 2839 - 2847, 2015.

67.

P. WOLCOTT, A. HEHR, and M.J. Dapino, “Optimized welding parameters for Al 6061 ultrasonic additive manufactured composites,” Journal of Materials Research, Vol. 29, No. 17, 2014.

66.

S. DONG and M.J. Dapino, “Wear reduction through piezoelectrically-assisted ultrasonic lubrication,” Smart Materials and Structures, 23, 104005 (12pp), 2014.

65.

R. HAHNLEN and M.J. Dapino, “NiTi-Al interface strength in Ultrasonic Additive Manufacturing composites,” Composites Part B: Engineering, 59, pp. 101-108, 2014.

64.

S. DONG and M.J. Dapino, “Elastic-plastic cube model for ultrasonic friction reduction via Poisson effect,” Ultrasonics, Vol. 54, No. 1, p. 343-350, January 2014.

63.

L. SHU, L. HEADINGS, M.J. Dapino, D. Chen, and Q. Lu, “Nonlinear model for Galfenol cantilevered unimorphs considering full magnetoelastic coupling,” Journal of Intelligent Material Systems and Structures, Vol. 25, No. 2, pp. 187 - 203, Jan. 2014.

62.

S. SANTAPURI, R.L. Lowe, S.E. Bechtel, M.J. Dapino, “Thermodynamic modeling of fully coupled finite-deformation thermo-electro-magneto-mechanical behavior for multifunctional applications,” International Journal of Engineering Science, Vol. 72, pp. 117-139, 2013.

61.

K. KOTIAN, L. HEADINGS, and M.J. Dapino, “Stress averaging in PVDF sensors for in-plane sinusoidal and impact-induced stresses,” IEEE Sensors Journal, Vol. 13, No. 11, p. 4444, 2013.

60.

J.J. SCHEIDLER and M.J. Dapino, “Nonlinear dynamic modeling and resonance tuning of Galfenol vibration absorbers,” Smart Materials and Structures, 22 085015, 2013.

59.

S. BHARADWAJ and M.J. Dapino, “Characterization of friction reduction with tangential ultrasonic vibrations using a SDOF model,” International Journal of Vehicle Design, Vol. 63, Nos. 2/3, 291 - 304, 2013.

58.

L. Weng, B. Wang, M. J. Dapino, Y. Sun, L. Wang, and B. Cui, “Relationship between magnetization and dynamic stress for Galfenol rod alloy and its application in force sensors,” Journal Applied Physics, 113, 17A917, 2013.

57.

L. Weng, Z. DENG, T. WALKER, M.J. Dapino and B. Wang, “Major and minor stress-magnetization loops in textured polycrystalline Fe81.6Ga18.4 Galfenol,” Journal of Applied Physics, Vol. 113, 024508, January 2013.

56.

P. EVANS and M.J. Dapino, “Measurement and modeling of magnetic hysteresis under field and stress in iron-gallium alloys,” Journal of Magnetism and Magnetic Materials, Vol. 330, pp. 37-48, March 2013.

55.

D.R. FOSTER, M.J. Dapino, and S.S. Babu, “Elastic constants of ultrasonic additive manufactured Al 3003-H18,” Ultrasonics, Vol. 53, pp. 211-218, 2013.

54.

S. CHAKRABARTI and M.J. Dapino, “Coupled axisymmetric finite element model of a hydraulically-amplified magnetostrictive actuator for active powertrain mounts,” Finite Elements in Analysis and Design, Vol. 60, pp. 25-34, November 2012.

53.

P. WOLCOTT, Z. Wang, L. Zhang, and M.J. Dapino, “RF patch antenna reconfiguration with Ni-Ti shape memory alloy switches,” Journal of Intelligent Material Systems and Structures, 24(8) 973983, 2012.

52.

R. HAHNLEN, G. FOX, and M.J. Dapino, “Fusion welding of nickel titanium and 304 stainless steel tubes. Part I: Laser welding,” Journal of Intelligent Material Systems and Structures, 24(8) 945961, 2012.

51.

G. FOX, R. HAHNLEN, and M.J. Dapino, “Fusion welding of nickel titanium and 304 stainless steel tubes. Part II: Tungsten inert gas welding,” Journal of Intelligent Material Systems and Structures, doi:10.1177/1045389X12461076, October 17, 2012.

50.

J.P. LARSON and M.J. Dapino, “Reliable, high-frequency miniature valves for smart material electro-hydraulic actuators,” Journal of Intelligent Material Systems and Structures, Volume 23, Issue 7, pp. 801-809, May 2012.

49.

S. CHAKRABARTI and M.J. Dapino, “Fully coupled discrete energy averaged model for Terfenol-D,” Journal of Applied Physics, Vol. 111, Issue 5, 054505, 6 March 2012.

48.

C.D. HOPKINS, P.J. WOLCOTT, M.J. Dapino, A.G. Truog, S.S. Babu, and S.A. Fernandez, “Optimizing ultrasonic additive manufactured Al 3003 properties with statistical modeling,” ASME Journal of Engineering Materials and Technology, Vol. 134, Issue 1, 011004, January 2012.

47.

R. BUCIO, S. HART, and M.J. Dapino, “Magnetostrictive actuation of a bone loading composite for accelerated tissue formation,” Smart Materials Research, Vol. 2012, Article ID 258638, 7 pages, 2012.

46.

R. HAHNLEN, G. FOX, and M.J. Dapino, “Ultrasonic soldering of shape memory NiTi to aluminum 2024,” Welding Journal, Vol. 91, Issue 1, pp. 1-7, January 2012.

45.

S. CHAKRABARTI and M.J. Dapino, “Nonlinear finite element model for 3D Galfenol systems,” Smart Materials and Structures, Vol. 20, No. 10, 105034, October 2011.

44.

P.J. WOLCOTT, C.D. HOPKINS, L. Zhang, and M.J. Dapino, “Smart switch metamaterials for multiband radio frequency antennas,” Journal of Intelligent Material Systems and Structures, Vol. 22, Issue 13, 1469 - 1478, September 2011.

43.

S. CHAKRABARTI and M.J. Dapino, “Hydraulically amplified Terfenol-D actuator for adaptive powertrain mounts,” ASME Journal of Vibration and Acoustics, 133, 061015, June 2011.

42.

L. SHU, M.J. Dapino, P.G. EVANS, D. Chen, Q. Lu, “Optimization and dynamic modeling of Galfenol unimorphs,” Journal of Intelligent Material Systems and Structures, Vol. 22, No. 8, 781-793, May 2011.

41.

D.E. Schick, S.S. Babu, D. FOSTER, M.J. Dapino, M. Short, and J.C. Lippold, “Transient thermal response in ultrasonic additive manufacturing of aluminum 3003,” Rapid Prototyping Journal, Vol. 17, Issue 5, pp. 369-379, 2011.

40.

P. EVANS and M.J. Dapino, “Dynamic model for 3-D magnetostrictive transducers,” IEEE Transactions on Magnetics, Vol. 47, No. 1, January 2011.

39.

P. EVANS and M.J. Dapino, “Stress-dependent susceptibility of Galfenol and application to force sensing,” Journal of Applied Physics, Vol. 108, Issue 7, 074517, 2010.

38.

C.D. HOPKINS, M.J. Dapino, and S.A. Fernandez, “Statistical characterization of Ultrasonic Additive Manufacturing Ti/Al composites,” ASME Journal of Engineering Materials and Technology, Vol. 132, Issue 4, 041006, October 2010.

37.

C. Mudivarthi, S. Datta, J. Atulasimha, P.G. EVANS, M.J. Dapino, and A.B. Flatau, “Anisotropy of constrained magnetostrictive materials,” Journal of Magnetism and Magnetic Materials, Vol. 322, Issue 20, pp. 3028-3034, October 2010.

36.

D. Schick, R. HAHNLEN, R. Dehoff, S.S. Babu, P. Colins, M.J. Dapino, and J.C. Lippold, “Microstructural characterization of bonding interfaces in aluminum 3003 blocks fabricated by ultrasonic additive manufacturing,” Welding Journal, Vol. 89, Issue 5, 105–115, May 2010.

35.

S. CHAKRABARTI and M.J. Dapino, “Dynamic model for a displacement amplified magnetostrictive driver for active powertrain mounts,” Smart Materials and Structures, Vol. 19, 055009, 2010.

34.

P. EVANS and M.J. Dapino, “Efficient magnetic hysteresis model for field and stress application in magnetostrictive Galfenol,” Journal of Applied Physics, Vol. 107, 063906, 2010.

33.

N.N. SARAWATE and M.J. Dapino, “Magnetomechanical characterization and unified energy model for quasistatic behavior of ferromagnetic shape memory Ni-Mn-Ga,” Smart Materials and Structures, Vol. 19, 035001, 22 January 2010.

32.

A. MAHADEVAN, P. EVANS, and M.J. Dapino, “Dependence of magnetic susceptibility on stress in textured polycrystalline Fe81.6Ga18.4 and Fe79.1Ga20.9 Galfenol alloys,” Applied Physics Letters, Vol. 96, Issue 1, 012502, 5 January 2010.

31.

S. Bashash, N. Jalili, P. EVANS, and M.J. Dapino, “Recursive memory-based hysteresis modeling for solid-state smart actuators,” Journal of Intelligent Material Systems and Structures, Vol. 20, 2161 - 2171, December 2009.

30.

N.N. SARAWATE and M.J. Dapino, “Dynamic sensing behavior of ferromagnetic shape memory Ni-Mn-Ga,” Smart Materials and Structures, Vol. 18, p. 104014, October 2009.

29.

N.N. SARAWATE and M.J. Dapino, “Stiffness tuning with bias magnetic fields in ferromagnetic shape memory Ni-Mn-Ga,” Journal of Intelligent Material Systems and Structures, Vol. 20, pp. 1625-1634, Sept. 2009.

28.

W.S. Oates, P.G. EVANS, R.C. Smith, and M.J. Dapino, “Experimental implementation of a hybrid nonlinear control design for magnetostrictive actuators,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 131, Issue 4, 041004, July 2009.

27.

J. XU, M.J. Dapino, D. Gallego, D. Hansford, “Microphone based on Polyvinylidene Fluoride (PVDF) micro-pillars and patterned electrodes,” Sensors and Actuators A: Physical, Vol. 153, Issue 1, pp. 24-32, 25 June 2009.

26.

P. EVANS and M.J. Dapino, “Efficient model for field-induced magnetization and magnetostriction of Galfenol,” Journal of Applied Physics, Vol. 105, 113901, 1 June 2009.

25.

N.N. SARAWATE and M.J. Dapino, “Dynamic actuation model for magnetostrictive materials,” Smart Materials and Structures, Vol. 17, 065013, 10 Oct. 2008.

24.

N.N. SARAWATE and M.J. Dapino, “Magnetization dependence on dynamic strain in ferromagnetic shape memory Ni-Mn-Ga,” Applied Physics Letters, Vol. 93, Issue 6, 11 August 2008.

23.

P.G. EVANS and M.J. Dapino, “State-space constitutive model for magnetization and magnetostriction of Galfenol alloys,” IEEE Transactions on Magnetics, Vol. 44, Issue 7, Part 1, pp. 1711-1720, July 2008.

22.

L.E. FAIDLEY, M.J. Dapino and G.N. Washington, “Homogenized strain model for Ni-Mn-Ga with collinear field and stress,Journal of Intelligent Material Systems and Structures, Vol. 19, No. 6, pp. 681-694, June 2008.

21.

N.N. SARAWATE and M.J. Dapino, “Frequency dependent strain-field hysteresis model for ferromagnetic shape memory Ni-Mn-Ga,” IEEE Transactions on Magnetics, Vol. 44, No. 5, pp. 566575, May 2008.

20.

N.N. SARAWATE and M.J. Dapino, “Magnetic field induced stress and magnetization in mechanically-blocked Ni-Mn-Ga,” Journal of Applied Physics, Vol. 103, Issue 8, 083902, 16 April 2008.

19.

D.T. NOSSE and M.J. Dapino, “Magnetorheological valve for hybrid electrohydrostatic actuation,” Journal of Intelligent Material Systems and Structures, Vol. 18, No. 11, 1121-1136, November 2007.

18.

F.T. Calkins, A.B. Flatau and M.J. Dapino, “Overview of magnetostrictive sensor technology,” Journal of Intelligent Material Systems and Structures, Vol. 18, No. 10, October 2007.

17.

A.P. MORTENSEN and M.J. Dapino, “Hybrid acoustic transducer employing magnetostrictive composite and ferroelectric material,” Journal of Sound and Vibration, Vol. 307, pp. 983991, 2007.

16.

N.N. SARAWATE and M.J. Dapino, “Continuum thermodynamics model for the sensing effect in ferromagnetic shape memory Ni-Mn-Ga,” Journal of Applied Physics, Vol. 101, No. 12, 123522, 15 June 2007.

15.

R.C. Smith and M.J. Dapino, “A homogenized energy model for the direct magnetomechanical effect,” IEEE Transactions on Magnetics, Vol. 42, No. 8, pp. 1944-1957, 2006.

14.

M.J. Dapino, A.B. Flatau and F.T. Calkins, “Statistical analysis of Terfenol-D material properties,Journal of Intelligent Material Systems and Structures, Vol. 17, No. 7, pp. 587-599, 2006.

13.

(Advances in Magnetics Paper) R.C. Smith, M.J. Dapino, T.R. Braun and A.P. MORTENSEN, “A homogenized energy framework for ferromagnetic hysteresis,” IEEE Transactions on Magnetics, Vol. 42, No. 7, pp. 1747-1769, 2006.

12.

A. MALLA, M.J. Dapino, T. Lograsso and D. Schlagel. “Large magnetically-induced strains in Ni50Mn28.7Ga21.3 driven with collinear field and stress,” Journal of Applied Physics, Vol. 99, No. 6, 063903, 2006.

11.

T.R. Braun, R.C. Smith and M.J. Dapino, “Experimental validation of a homogenized energy model for magnetic after-effects,” Applied Physics Letters, Vol. 88, 122511, 2006.

10.

N. SARAWATE and M.J. Dapino, “Experimental characterization of the sensor effect in ferromagnetic shape memory NiMnGa,” Applied Physics Letters, Vol. 88, 121923, 2006.

9.

L.E. FAIDLEY, M.J. Dapino, G.N. Washington and T.A. Lograsso, “Modulus increase with magnetic field in ferromagnetic shape memory Ni-Mn-Ga,” Journal of Intelligent Material Systems and Structures, Vol. 17, No. 2, pp. 123-132, 2006.

8.

R.C. Smith, S. Seelecke, M.J. Dapino and Z. Ounaies, “A unified framework for modeling hysteresis in ferroic materials,” Journal of the Mechanics and Physics of Solids, Vol. 54, No. 1, pp. 46-85, 2006.

7.

P.R. DOWNEY and M.J. Dapino, “Extended frequency bandwidth and electrical resonance tuning in hybrid Terfenol-D/PMN-PT transducers in mechanical series configuration,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 9, pp. 757-772, 2005.

6.

M.J. Dapino, “On magnetostrictive materials and their use in adaptive structures,” Structural Engineering and Mechanics, Vol. 17, No. 3-4, pp. 303-329, 2004.

5.

R.C. Smith, M.J. Dapino and S. Seelecke, “Free energy model for hysteresis in magnetostrictive transducers,” Journal of Applied Physics, Vol. 93, No. 1, pp. 458-466, 2003.

4.

M.J. Dapino, R.C. Smith, F.T. Calkins and A.B. Flatau, “A coupled magnetomechanical model for magnetostrictive transducers and its application to Villari-effect sensors,” Journal of Intelligent Material Systems and Structures, Vol. 13, No. 11, pp. 737-748, 2002.

3.

A.B. Flatau, M.J. Dapino and F.T. Calkins, “High bandwidth tunability in a smart vibration absorber,Journal of Intelligent Material Systems and Structures, Vol. 11, No. 12, pp. 923-929, 2000.

2.

M.J. Dapino, R.C. Smith and A.B. Flatau, “Structural-magnetic strain model for magnetostrictive transducers,” IEEE Transactions on Magnetics, Vol. 36, No. 3, pp. 545–556, 2000.

1.

M.J. Dapino, R.C. Smith, L.E. Faidley and A.B. Flatau, “A coupled structural-magnetic strain and stress model for magnetostrictive transducers,” Journal of Intelligent Material Systems and Structures, Vol. 11, No. 2, pp. 135–152, 2000.